ATTO Technology FC-3321 Guia de Configuração descarregar pdf (Página 31)

Upgrading Windows 2000 Clients

Upgrading the ATTO Phantom Device

The ATTO Phantom Device will only load when the ATTO Fibre Channel

adapter board cannot find any devices. To upgrade this device, you must

disconnect the Fibre Channel cable from the ATTO Fibre Channel adapter

board. The ATTO Phantom Device will appear in the Device Manager after

you disconnect the Fibre Channel cable. Keep the cable disconnected until

the firmware upgrade is complete.

To upgrade the ATTO Phantom Device:

1. Disconnect Fibre Channel cables from the ATTO ExpressPCI FC 3300

adapter board.

2. Right-click on My Computer and select Manage. The Computer

Management Window opens.

3. Select Device Manager. The Device Manager opens.

4. Click the plus sign (+) next to SCSI and RAID Controllers.

5. Right-click on the ATTO Phantom Device and select Properties.

If you have multiple ATTO ExpressPCI FC 3300 adapter boards in the

system you should see a Phantom Device for each board. For example, a

File Manager with two ATTO ExpressPCI FC 3300 adapter boards would

display two ATTO Phantom Devices. Each device must be upgraded.

6. Click the Driver tab in the Properties window.

7. Click Update Driver in Driver tab.

8. Click Next in Upgrade Device Driver Wizard.

9. Select “Display a list of known drivers” in Install Hardware Device

Drivers Window.

10. Click Next in Install Hardware Device Drivers Window.

11. Click Have Disk in Select a Device Driver Window.

12. Click Browse from the Install from Disk Window.

13. Navigate to the ATTOMTLN.inf file.

0578801A_UP.fm Page 31 Tuesday, May 6, 2003 4:47 PM

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Sem comentários

ATTO Technology FC-3321 Guia de Configuração Página 31