ATTO Technology FC-3321 Guia de Configuração descarregar pdf (Página 16)

Version 3.3 Upgrade Notes

10. Click Next in Install Hardware Device Drivers Window.

11. Click Have Disk in Select a Device Driver Window.

12. Click Browse from the Install from Disk Window.

13. Navigate to the ATTOMTLN.inf file.

14. Click Open in the Locate File Window. You will receive an incorrect

list of devices in the Select a Device Driver Window. The Phantom

Device has changed from a SCSI and RAID device to a System device.

Step 15 only applies to the first Phantom Device you upgrade on the

system. After you upgrade the first device, on systems with multiple

Phantom Devices, subsequent devices will display the correct list indicated

in step 14.

15. Click Back.

16. Repeat steps 10 to 14.

You should now receive the correct list in the Select a Device Driver

window. Select the Phantom Device.

17. Click Next in the Select Device Driver Installation window.

18. Click Finish. The driver version of the Phantom Device should be v1.0

in the Properties window you opened in step 5.

19. Close the Properties window.

20. Repeat steps 5 to 19 for each Phantom Device listed.

Upgrading the ATTO Fibre Channel Driver

Use the following instructions to upgrade the ATTO Fibre Channel driver

in your LANserver EX.

To install the ATTO Fibre Channel Driver on a Windows 2000 or

Windows XP client:

You must be logged in as an Administrator to upgrade drivers.

0578801A_UP.fm Page 16 Tuesday, May 6, 2003 4:47 PM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

Sem comentários

ATTO Technology FC-3321 Guia de Configuração Página 16