ATTO Technology FC-3321 Guia de Configuração descarregar pdf (Página 18)

Version 3.3 Upgrade Notes

22. Click Next. An Update Driver Warning appears.

23. Click Yes. The Start Device Driver Installation screen appears.

24. Click Next. A Digital Signature Not Found dialog box opens.

25. Click Yes. The Hardware Installation screen appears.

26. Click Next. It takes several minutes to install the driver. This time

varies based on the Avid workstation. When finished, the Completing

the Upgrade Device Driver Wizard shows a finished installing the

software message.

27. Click Finish.

28. Click Close in the Fibre Channel Controller Properties dialog box.

29. Reboot the client.

Upgrading the ATTO Firmware

You must make sure the Fibre Channel cables are disconnected from the

ATTO Fibre Channel adapter board before you proceed.

The ATTO configuration utility only supports ATTO 3300 Fibre Channel

adapter board.

To upgrade the ATTO firmware using the ATTO Configuration Utility:

1. Click the Start button, and select Programs > ExpressPCI

Configuration Tool. The Configuration tool opens.

2. From the Device Listing window, click the plus sign (+). The Hosts

Window opens.

3. Click the plus sign (+). The Localhost Window opens.

4. Click the Express PCI FC 3300 that appears under localhost.

5. Click the Flash tab that appears to the right of the Main Window.

6. Click the Browse button and on the MediaNetwork CD-ROM, navigate

to the flash bundle file (FlashBundle_232_.2300).

7. Click the Update button.

The system will appear to hang for several seconds while the flash occurs.

0578801A_UP.fm Page 18 Tuesday, May 6, 2003 4:47 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Sem comentários

ATTO Technology FC-3321 Guia de Configuração Página 18