Atto-technology FastStream SC 5700 Manual do Utilizador descarregar pdf (Página 17)

After creating RAID groups

1 If you are not already in the

ExpressNAV Storage Manager,

type the IP address of your

appliance in a standard browser.

On the splash screen, click

Enter Here. In the box provided,

type in your user name and

password, and click

OK.

2 Click on the

Diagnostics button on the left

hand side of the ExpressNAV Storage

Manager.

3 Choose either I

nitialize and Verify Drives or

Read-Only Drive Test

from the Select User

Process

menu.

4 Click

Next.

5 If no drives appear in the information box, click

on the

System Scan button.

If drives are available, click on the drives you

wish to verify, initialize or test; the drives are

highlighted.

6 Click

Commit.

CAUTIONCAUTION

Do not restart the FastStream or

disconnect or power cycle drives during

Drive Initialization and Verification or you

must start the verification process from the

beginning.

7 A warning box appears. In the warning box,

verify that you want to complete the

configuration by clicking on

Yes. Clicking on No

ends the procedure without making a change.

8 If you chose to initialize and verify drives, the

Health and Status Monitor page appears and

all data on the previously-highlighted drives has

been erased.

If you chose to do a read-only test, the

Drive

Performance and Health

page appears

showing what tests are running and their

results. You may select other tests to run or

continue on to other tasks.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 72 73

Comentários a estes Manuais

Sem comentários

Atto-technology FastStream SC 5700 Manual do Utilizador Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Atto-technology FastStream SC 5700