ATTO Technology UL2D Especificações descarregar pdf (Página 67)

4-17

Installing the Avid Board Set

Installing a Meridien 3D DVE Effects Board

If you have purchased a system that contains a 3D DVE effects board,

you should install it now. Depending upon the system, the board will

be either a Genie effects board or a Mercedes effects board. Both the

Genie effects board and Mercedes effects board take up one PCI slot as

shown in the tables in “Avid Board Configurations” on page 4-5.

Installing the Mercedes Effects Board

The Mercedes effects board is standard equipment on Symphony 3.0

and Symphony Universal 3.0. Interconnection between the Mercedes

effects board and the Meridien III-U digital media daughter board is

accomplished with a newly designed flexible over-the-top connector.

1. Ensure that the Meridien III-U digital media board set has been

assembled and installed in the system (see Figure 4-4).

2. Install and secure the Mercedes effects board into the PCI slot

recommended in the product board configuration tables.

Figure 4-7 Mercedes and Meridien III-U Daughter Board

3. Orient the flexible over-the-top connector as shown in Figure 4-7,

and then carefully seat the flexible over-the-top connector into the

daughter board and Mercedes connectors.

The device driver is installed when the Avid editing product is

installed.

Mercedes

Meridien III-U

board set

Flexible over-the-top connector

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 117 118

Sem comentários

ATTO Technology UL2D Especificações Página 67