Atto-technology 2400C/R/D Manual do Utilizador descarregar pdf (Página 11)

A bicolor Ready/Fault LED

lights green to indicate

ready, lights yellow to show a faulted condition, and is

off to indicate not ready.

Embedded in the Ethernet port connector:

lighted green LED shows a valid link; off indicates that

no link is present. A separate blinking yellow LED

indicates activity.

Fibre Channel port:

a lighted green LED indicates

link; off means no link. A separate green LED

indicates activity if it is lit, no activity if it is off.

SCSI ports:

a green LED on each port indicates

activity if is lit.

LEDs on the front panel are:

A bicolor Ready/Fault LED

is lighted green to

indicate ready, lighted yellow to show a faulted

condition, and off indicates not ready.

SCSI ports:

a green LED on each port indicates

activity if is lit.

Fibre Channel port:

bicolor LED indicates FC

speed. If it is off, speed is 1-Gb; if it is green, 2-Gb, and

yellow indicates 4-Gb FC. A separate green LED

indicates activity if it is lit, no activity if it is off.

Exhibit 1.2-1 FibreBridge 2390R/D dimensions with front panel LEDs and connector side details

Serial port

Ready, Fault LEDs

Ethernet port Fibre Channel port

FC Activity, Link LEDs

SCSI ports Power receptacle

SCSI Activity LEDs

Reset switch

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 49 50

Sem comentários

Atto-technology 2400C/R/D Manual do Utilizador Página 11